MODIFIKASI STRUKTUR INTERFACE TIPE DECK-ON-PILE UNTUK MENDUKUNG FUNGSI GANDA: JEMBATAN DAN CONTAINER YARD STUDI KASUS TERMINAL KALIBARU PELABUHAN TANJUNG PRIOK

Authors

  • Nur Laili Safitri Universitas Borobudur
  • Muhammad Agung Prasetyo
  • Sulastri Iskandar
  • Wahyu Inggar Fipiana

DOI:

https://doi.org/10.47662/alulum.v14i1.1125

Keywords:

Struktur Interface, Deck on pile, Container, SAP2000, Ensoft LPILE

Abstract

This study discusses the modification of the interface pier structure at the Kalibaru Container Terminal, Tanjung Priok Port or NPCT (New Priok Container Terminal), where the existing condition functions as a connecting bridge between the existing container yard (CY-57) and the reclamation area, now it has an additional function as a container storage reserve area. The purpose of this study is to determine the reliability of the structural design against the loads acting on the structure and to determine the forces that occur and the effect of the reduction in foundation strength due to modifying the interface deck-on-pile structure. Structural analysis uses SAP2000 software while pile foundation analysis is analyzed with Ensoft LPILE, and technical drawing with AutoCAD. The results of the study show that the Interface structure is larger than the original design due to the addition of container stack loads and Loading Unloading activities and the dimensions of the structural elements have changed from the initial design both in the foundation, pilecap, beam and plate. This study shows that the modification of the deck-on-pile interface can support dual functions as a connecting bridge and a container storage reserve area effectively and safely.

References

American Society of Civil Engineers (ASCE). (2014). Seismic design of piers and wharves (ASCE/COPRI 61-14). Reston, VA: American Society of Civil Engineers.

Badan Standardisasi Nasional. (2013). SNI 1727:2013 – Beban Minimum untuk Perancangan Bangunan Gedung dan Struktur Lain. Jakarta: BSN. 1.

Badan Standardisasi Nasional. (2019). SNI 1726:2019 – Tata Cara Perencanaan Ketahanan Gempa untuk Struktur Bangunan Gedung dan Non Gedung. Jakarta: BSN. 1.

Badan Standardisasi Nasional. (2019). SNI 2847:2019 – Persyaratan Beton Struktural untuk Bangunan dan Penjelasan. Jakarta: BSN. 1.

British Standards Institution. (1978). BS 5400: Part 2: 1978 Steel, concrete and composite bridges – Part 2: Specification for loads. London: BSI.

British Standards Institution. (2016). BS 6349-1-2: Maritime works – General – Code of practice for assessment of actions. London: BSI.

Lestari, A. M. F. (2013). Analisa daya dukung tiang tunggal dengan SPT. Jurnal Teknologi Berkelanjutan (Sustainable Technology Journal), 12(2), 159-165. Diakses dari http://jtb.ulm.ac.id/index.php/JTB

Nilasari, N, V, A., & Kamaludin. (2016). Evaluasi Struktur Atas Dermaga 1.000 DWT terhadap Berbagai Zona Gempa berdasarkan Pedoman Tata Cara Perencanaan Pelabuhan Tahun 2015. Reka Racana: Jurnal Teknik Sipil, 2(3), 159-166. Diakses dari https://ejurnal.itenas.ac.id/index.php/rekaracana/article/view/1131

Port of Long Beach. (n.d.). Wharf Design Criteria (Version 4.0). Long Beach, CA: Port of Long Beach.

Prasetyo, D. B. (2017). Analisis kekuatan dermaga akibat modifikasi dan penambahan beban dengan pendekatan LRFD studi kasus Jetty Propylene PT. Pertamina RU VI, Balongan, Indramayu (Tugas akhir, Institut Teknologi Sepuluh Nopember). Surabaya: Departemen Teknik Kelautan, Fakultas Teknologi Kelautan, Institut Teknologi Sepuluh Nopember.

Putri, M. A. & Anggraeni, A. P. (2025). Rancang bangun alat monitoring kemiringan pada lantai berbasis Google Sheets. Jurnal Al Ulum LPPM Universitas Al Washliyah Medan, 13(2), 188-194. Diakses dari https://ejurnal.univamedan.ac.id/alulum/article/view/1004

Downloads

Published

2026-01-30